AD-25182501CHAPTER 3
Page 28
Revision 1.0.1
NAP- 200-003
Sheet 10/29
Installation of Main Equipment
(6) When mounting the RACK PARTS to a wall, connect all the RACK PARTS to each other, and connect the
BASE to the bottom RACK PARTS using the M5 Machine screws (provided), as shown in Figure 003-10.
Figure 003-10 Screwing the RACK PARTS and the BASE
(JOINT)
RACK PARTS
M5 MACHINE SCREW-Cī
(x2/JOINT AREA)ī
(PROVIDED WITH RACK PARTS)
(JOINT)
BASE
To Next Page
Loading...
