NEC NEAX 7400 ICS - Peripheral Equipment and Cable Termination

AD-25182501CHAPTER 3
Page 48
Revision 1.0.1
NAP- 200-004
Sheet 1/9
Installation of Peripheral
Equipment
1. Installation of SN694 ATTCON
(1) Screw the handset support onto the bottom of the console as shown in Figure 004-1.
Note:
The handset support can be mounted at either the right side or left side of the console body.
Figure 004-1: Mounting of Handset Support
PAN-HEAD TAPPING SCREW
(M3, 10mm LENGTH)
WASHER (M3)
SUPPORT
HANDSET
SUPPORT
SN694 ATTCON