NEC NEAX 7400 ICS - Page 29

AD-25182501 CHAPTER 3
Page 15
Revision 1.0.1
Figure 3-3 Procedure Flowchart (Continued)
The mark shown below is attached to the NAP sheet for each procedure in which circuit cards are handled. When
doing such a procedure, the installer must exercise caution, to prevent damage caused by static electricity (See
paragraph 1.3 in this chapter).
A
END
MOUNTING
OF
CIRCUIT CARDS
SYSYEM INITIALIZATION
AND
SYSTEM DATA ENTRY
OPERATION
TEST
NAP- 200-008
NAP- 200-009
NAP- 200-010
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required