NEC NP-17CU01 - Connecting with the Image Input Port

87
Projector Adjustment and Connecting
3-7. Connecting with the Image Input Port
By installing option board to projector, you can add input port. Input port which can add to option board is listed below. For
the connection diagram of projector and peripheral equipment, refer to Installation manual of option board.
Option Board Image Input Port
NP-90MS02-4K (Note) HDMI input port x1
SDI input port x2
(Note) The NP-90MS02-4K video input ports do not support CineLink 2. The NP-90MS02-4K video input ports cannot display the
encrypted contents.