95
LCD Menu
Chiller Fan
Resets the chiller unit fan usage time. Press the ENTER button, then select “Yes” in the displayed confirmation screen, and
then press the ENTER button to reset the chiller unit fan usage time.
← Press the ENTER button to display the confirmation screen.
Douser Count
Resets the number of times the douser has been used. Press the ENTER button, then select “Yes” in the displayed confirmation
screen, and then press the ENTER button to reset the number of times the douser has been used.
← Press the ENTER button to display the confirmation screen.
4-3-4. Setup
This menu is for service personnel. For the procedure to use it, refer to “4-1-1. When You Use the Service Personnel Menu”
(page 90).
Douser Setup
Sets the douser open/close state. Request your dealer/distributor to perform the setting.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Open(Power On) When set to Enable, the douser opens after the projector starts up.
Light On When set to Enable, the douser opens when the light source is turned on.
Title Select When set to Enable, the douser opens when a title is selected.
To Next Page
Loading...
