88
Projector Adjustment and Connecting
3-8. Connecting the Various Control Terminal
For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).
PC control terminal (RS-232) Use this terminal when controlling the projector in serial connection from a PC. Use a
retail RS-232C straight cable for the connection between the projector and the
computer.
Ethernet port (LAN) Use this port when controlling the projector in LAN connection from a PC or a cinema
server. Use a retail LAN cable (10/100/1000Base-T) for the connection between the
projector and the computer after checking with your network administrator.
Chiller unit control port Use this port to control the chiller unit from the projector through a LAN connection. Use
a retail Control cable (10/100/1000Base-T) for the connection between the projector and
the computer after checking with your network administrator.
GP I/O3DRS-232
USB
LAN
REMOTE
RS-232C
PC
Cinema server
LAN cable
Network hub/Router
This completes the adjustment and connection of the projector. Next, set up the projector from the DCC. Refer to the “Digital
Cinema Communicator for S2 Installation Manual” for the procedure.
To Next Page
Loading...
