98
LCD Menu
Silent Mode
Sets whether the status indicators (SYSTEM status indicator, LIGHT status indicator), buzzer, indicators on the projector’s
control panel, illumination, and LCD screen backlight are enabled or disabled.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Rear LED Sets whether to use or not use the SYSTEM status indicator.
Enable: Use
Disable: Not use (the SYSTEM status indicator does not light up)
Buzzer Sets whether to use or not use the buzzer.
Enable: Use
Disable: Not use (the buzzer does not sound)
Control Button Sets whether to use or not use the indicators on the projector’s control panel.
Enable: Use
Disable: Not use (the LED next to the buttons do not light up)
LCD Backlight Sets whether to use or not use the illumination and LCD screen backlight on the projector’s
control panel.
Enable: Use
Disable: Not use (turns off the illumination and LCD screen backlight on the projector’s control
panel)
TIP
When LCD Backlight is set to Disable, you can change the setting to Enable by long-pressing (3 seconds or
more) the EXIT button and UP button.
To Next Page
Loading...
