NEC NP-P401W - Page 139

127
5. Using On-Screen Menu
11 .Selectthe[AUTHENTICATION]tab.
 The[AUTHENTICATION]pagewillbedisplayed.
Select either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setting items vary depending on the EAP
type.
See the table below.
EAPType SettingItem Note
EAP-TLS
UserName 1 character or more and 32 characters or
less
ClientCerticate PKCS#12formatle
CACerticate
(Certicateauthority’scerticate)
DERformatle
PEAP-MSCHAPv2 UserName 1 character or more and 32 characters or
less
Password 1 character or more and 32 characters or
less
CACerticate
(Certicateauthority’scerticate)
DERformatle
①Selecting[EAP-TLS]for[EAPTYPE]:
The following section explains the operation for selecting [EAP-TLS].
For selecting [PEAP-MSCHAPv2], go on to Step 12 on page 129.
12. Selectthe[USERNAME]eldandpresstheENTERbutton.
 Thecharacterentryscreen(softwarekeyboard)willbedisplayed.Setausername.
• Ausernamemustbe1characterormoreand32charactersorless.
• Seepage131forusingthesoftwarekeyboardtoentercharacters.