NEC NP-P401W - Adjusting the Vertical Position of a Projected Image (Lens Shift)

20
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
Rotatethelensshiftdial.
Downward
Upward
Lens shift dial
NOTE:
Thelensshiftdialcannotberotatedbeyondthemaximumupwardordownwardshift.Forciblyrotatingmaycausedamagetothe
projector.
TIP:
Lensshiftcanbeadjustedwiththerangebelow.Ifyouwishtomoveuptheimagehigherthanthislimit,usethetiltfootofthe
projector.
Desktopfrontprojection
[P501X/P451X/PE501X]
[P451W/P401W]
Height of projected image
Height of projected image
Vertical shift range (0 to 0.5V)
Vertical shift range (0 to 0.6V)