NEC NP04WK - Specifications

ENG-20
Specifications
: Wall mount unit
Product name Model
name
Adjustable angles
: NP04WK/NP04WK1/NP06WK/NP06WK1
: Vertical angle – ±5°; Horizontal angle – ±5°; Tilt angle – ±5°
Adjustable positions : Front/back – 422; Horizontal – ±50 mm; Vertical – ±40 mm External
Dimensions : NP04WK： 530 (W) x 572 (D) x 223 (H) mm
NP04WK1：530 (W) x 575 (D) x 223 (H) mm
NP06WK ：530 (W) x 572 (D) x 223 (H) mm
NP06WK1：530 (W) x 575 (D) x 223 (H) mm
Weight : Approx. NP04WK : 9.3 kg / NP04WK1 : 11.2 kg
NP06WK : 10.3kg / NP06WK1 : 12.2 kg
Load capacity : 13.0 kg
These specifications and the design are subject to change without notice.
Using the wall plate (NP04WK1/NP06WK1 only)
When attaching the wall adapter using the wall plate, make 16 holes in the wall at the
posi-tions indicated below. Make holes with the proper depth and diameter for the screws
to be used.
Dimensional drawing for screw positions (units: mm)
(1) Attach the included wall plate to a vertical member in the wall using screws (or bolts) (in
12 locations).
(2) Securely fasten the wall adapter to the wall plate using the included screws (M6×10),
spacers and washers (4 locations). For cautions, etc., see page ENG-10.
(1)
(2)
M6×10 screw
Spacer
Washer
Wall adapter mount screw hole
Wall mount hole
Cable hole