NEC NP1250 - Viewer PPT Converter 3.0; PC Control Utility 3.0

13
1. What You Can Do with User Supportware 6
What You Can Do with User Supportware 6
1
1-4. Viewer PPT Converter 3.0
Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/
2000/2002/2003/2007 into an index file that can be displayed with the viewer function of the
projector.
l When converting, specify a USB memory device as the destination to which the index file
is to be saved. Then you can easily make your presentation by simply inserting the USB
memory device into the projector (viewer function of the projector).
l If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can
activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically
registered to PowerPoint).
1-5. PC Control Utility 3.0
PC Control Utility 3.0 is software that allows you to operate the projector from the personal
computer when the personal computer and the projector are connected with LAN (wired or
wireless) or a serial cable.
l You can operate the projector as follows from your personal computer.
For details of each function, refer to the help function of PC Control Utility 3.0.
• Power on/off
• Input signal switching
• Muting (temporarily disabling audio/video)
• Freezing (locking the projected image)
• Logo image transmission