NEC NP1250 - 4 Configuring the LAN Settings of the Projector; Displaying On-Screen Menu (NETWORK SETTINGS)

17
4. Configuring the LAN Settings of the Projector
Configuring the LAN Settings of the Projector
4
4. Configuring the LAN Settings of the Projector
Reference
For details on how to turn on/off the power to the projector and how to operate the buttons
and remote control of the projector, refer to “User’s Manual” included in the User’s Manual
CD-ROM.
4-1. Displaying On-Screen Menu (NETWORK SETTINGS)
Preparation:
Turn on the power to the projector and project images to the screen.
It is not necessary to select the signals.
1
Press the button.
The on-screen menu is displayed.
2
Use the button to select the Setup submenu.
3
Press the button.
The “BASIC” tab is highlighted.