20
4. Configuring the LAN Settings of the Projector
n Setting Wireless LAN
Display the “WIRELESS” page of “NETWORK SETTINGS”.
Configure the setting of wireless LAN in the “WIRELESS” page of “NETWORK SETTINGS” selected
from On-Screen Menu.
<1> In the “NETWORK SETTINGS” setting window, if the “GENERAL” tab is highlighted, press the
button to highlight “WIRELESS”.
The “WIRELESS” page is displayed.
• If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK
SETTINGS)” ( page 17).
Select “PROFILES”.
<1> Press the
button once to highlight the “PROFILES” field and press the
button.
<2> Use the
button to highlight “PROFILE 1”, and press the button.
• “PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting for
LAN.
• “EASY CONNECTION” is a mode in which the personal computer that runs Image Express Utility
2.0 in the User Supportware 6 CD-ROM is easily connected to wireless LAN.
Note that “EASY CONNECTION” does not support software other than Image Express Utility
2.0.
• When “EASY CONNECTION” is selected, the IP ADDRESS and SUBNET MASK do not have
to be set. To use “EASY CONNECTION”, the Windows user account must have [Administrator]
privilege (Windows Vista) or [Computer Administrator] privilege (Windows XP). It cannot be used
with Windows 2000.
To Next Page
Loading...
