NEC NP1250 - Page 31

31
5. Configuring the LAN Settings of the PC ([Example] Wireless LAN in Windows Vista: Ad Hoc connection)
5
([Example] Wireless LAN in Windows Vista: Ad Hoc connection)
Configuring the LAN Settings of the PC
If you are not connected to a network, the following window is displayed.
3
Click [Connect to a network].
A list of the networks you are able to connect to is displayed.
4
From the list, click the SSID of the projector you want to connect to (“NECPJ”
in this example), and click [Connect].
A screen for entering the security key is displayed.
5
Enter the key that you set in the WEP field on the projector (“NECDS” in
this example).
6
Click [Connect].
3
Click
4-2
4-1
Click
Click
5
6
Click
Click