NEC NP1250 - Page 38

38
6. Configuring the LAN Settings of the PC ([Example] Wireless LAN in Windows XP: Ad Hoc connection)
11
Input WEP key to set up an encryption key and click [Connect].
• Enter the “WEP” encryption key. For example, if the WEP setting on the projector is set to “64-bit”
and Key 1 on the projector is set to “NECDS”, enter “NECDS” in the Network key field.
• Enter the same encryption key again in the Confirmation field.
The window above only appears if the projector you are connecting to is configured to use a WEP key.
Follow the steps below to change the encryption settings. For details, see the Windows Help file.
(1) Click [Change advanced settings] from the screen in step
10
above.
The “Wireless Network Connection Properties” window is displayed.
(2) Click the [Wireless Network] tab.
(3) Select the SSID of the projector under [Preferred Networks] and click [Properties].
The “Properties” of the selected SSID is displayed. Configure the wireless network key under the
[Association] tab according to those for the projector.
This completes the configuration of a wireless LAN Ad Hoc connection on the personal computer
(Windows XP).
Use each software program in User Supportware 6 to transmit the PC screen to the projector.
11 -1
11 -2
11 -3
Input
Input for confirmation
Click