5. Using On-Screen Display
91
LAN Settings
The LAN settings tab is accessed by using the Setup/Installation tab and contains gen-
eral LAN settings.
The following table lists all functions with a description and the default setting.
ITEM DESCRIPTION
DHCP
Select either a static IP or DHCP IP setting by selecting the appropriate radio
button.
IP Address Displays the IP address.
Subnet
Mask
Displays the subnet mask.
Gateway
Enable or disable the network gateway setting. Click on the radio button to
change the setting.
DNS
Server
Enable or disable the DNS server settings. Click on the radio button to
change the setting.
Apply
Settings
Apply and save settings.
Downloaded From projector-manual.com NEC Manuals
To Next Page
Loading...
Need help?
General
