NEC NP4001 - OSD Controls and Status LEDS

1. Introduction
8
OSD Controls and Status LEDS
ITEM LABEL DESCRIPTION SEE PAGE:
1.
MENU Open / Close the OSD
61
2.
SELECT PAD Navigate and change settings in the OSD
61
3.
RIGHT CURSOR/
VOLUME
INCREASE
Increase volume
46
4.
EXIT Exit the On-Screen Display (OSD)
62
5.
SOURCE
Change or select the input device
39
6.
AUTO ADJUST Optimize image size, position, and resolution
45
Green
7.
LAMP 1
Flashing
See Indicator Messages
113
Downloaded From projector-manual.com NEC Manuals