88
6. Using On-Screen Menu
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (
→
page 38)
NOTE: The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOMETRIC CORRECTION] is selected.
Using the PIP/SIDE BY SIDE Function [PIP/SIDE BY SIDE]
This function allows you to view two different signals simultaneously. (
→
page 41)
MODE:
This option allows you to select two modes: PIP and SIDE BY SIDE.
PIP: This option allows you to view a sub picture in the main picture.
SIDE BY SIDE: This allows you to view two pictures side by side.
POSITION:
When [PIP] is selected for [MODE], this option allows you to select the position of a sub picture in the main pic-
ture.
The options are: top-left, top-right, bottom left, and bottom right.
NOTE: The [POSITION] cannot be selected when [SIDE BY SIDE] is selected.
SOURCE:
This option allows you to select a sub picture signal.
The options are: Off, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/SIDE BY SIDE mode and return to the normal screen.
To Next Page
Loading...
