87
6. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Selecting Keystone Mode [KEYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
[AUTO KEYSTONE] will turn on the auto keystone feature.
Changes will be saved even when you turn off the projector.
You can correct vertical distortion manually from the menu. (
→
page 28)
To do do, select [OFF] on the [AUTO KEYSTONE] screen.
NOTE: The [KEYSTONE] item is not available when [CORNERSTONE] or [GEOMETRIC CORRECTION] is selected.
To Next Page
Loading...
