NEC PA571W - Page 159

145
5. Using On-Screen Menu
[AUTHENTICATION](requiredforwirelessonly)
SettingisrequiredforusingWPA-EAPorWPA2-EAP.
Preparation before setting
SelectawirelessLANcompliantWPA-EAPorWPA2-EAPauthenticationandinstalladigitalcerticateontheprojec-
tor.
1. Set[DATEANDTIME]ontheprojector.(→ page 118)
2. Use a computer to save digital certificates (files) for WPA-EAP or WPA2-EAP setting to your USB memory
device.
 Aftercompletingsavingthele,removetheUSBmemorydevicefromthecomputer.
NOTE:
• Saveadigitalcerticate(le)totherootfolderoftheUSBmemory.
• TheleformatsofdigitalcerticatethataresupportedbytheprojectorareDERandPKCS#12only.
• Theprojectorcannothandleanydigitalcerticatewhoselesizeexceeds8KB.
• CRL(CerticateRelocationList)isnotsupported.
• Clientcerticatechainisnotsupported.

3. Plug the USB memory device into the USB port of the projector.
USB
Setting Procedures
1. Select[NETWORKSETTINGS(MM)]→[WIRELESSSLAN].
2. SetitemssuchasPROFILES,DHCP,IPADDRESS,SUBNETMASKandothersasrequired.
• Select[PROFILE1]or[PROFILE2]for[PROFILES].If[EASYCONNECTION]isselected,WPA-PSK,WPA2-
PSK,WPA-EAP,orWPA2-EAPisnotavailable.
3. Select[ADVANCED]andpresstheENTERbutton.
 The[ADVANCED]settingscreenwillbedisplayed.