NEC PA571W - Turning on the Projector

16
2. Projecting an Image (Basic Operation)
Standby Blinking Power On
Steady red light Blinking blue
light
Steady blue
light
❸ Turning on the Projector
1. Remove the lens cap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
 ThePOWERindicator will lightupinbluefromredand
thenstartblinking.Afterthat,theimagewillbeprojected
ontothescreen.
TIP:
• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
PASSWORD.” is displayed, it means that the [SECURITY]
featureisturnedon.(→ page 38)
• When the ECOmessage is displayed, it means that [ON] is
selectedfor[ECOMESSAGE].(→ page 110)
• PressingbuttonssuchaspowerbuttonandMENUbuttonwill
makesound.Toturnoffthebeepsound,select[OFF]for[BEEP]
fromthemenu.(→ page 121)
 Afteryouturnonyourprojector,ensurethatthecomputer
orvideosourceisturnedon.
NOTE:Abluescreen(bluebackground)isdisplayedwhennosignal
isbeinginput(byfactorydefaultmenusettings).
(→page270)