NEC PA803U - 3. Convenient Features; Turning off Image and Sound

19
2. Projecting an Image (Basic Operation)
❹ Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
PresstheINPUTbuttonfor1secondorlonger.Theprojectorwillsearch
fortheavailableinputsourceanddisplayit.Theinputsourcewillchange
as follows:
HDMI1→HDMI2→DisplayPort→COMUPTER→HDBaseT→HDMI1
→ …
• Pressitbrieytodisplaythe[INPUT]screen.
Press the ▼/▲buttonstomatchthetargetinputterminalandthenpress
theENTERbuttontoswitchtheinput.Todeletethemenudisplayin
the[INPUT]screen,presstheMENUorEXITbutton.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Pressanyoneofthe1/HDMI1,2/HDMI2,3/DisplayPort,4/Computer,
or5/HDBaseTbutton.