NEC PE523X - Page 113

102
6. Installation and Connections
ConnectionExample(1)[SIMPLEACCESSPOINT]
SettheprojectorasSIMPLEACCESSPOINTforconnectingtoterminalsascomputersandsmartphones.
USB Wireless LAN Unit
ConnectionExample(2)[INFRASTRUCTURE]
Connecttheprojectortowired/wirelessLANviawirelessLANaccesspoint.
USB Wireless LAN Unit
Wired LAN
Wireless access point
1. ConnectacomputertotheprojectorviawiredLAN.(→ page 99)
2. Usethecomputer’sbrowsertodisplaytheprojector’sHTTPserver.(→ page 36)
3. UseanHTTPservertosetthewirelessLAN.(→ page 39)
 Selecteither[SIMPLEACCESSPOINT]or[INFRASTRUCTURE]for[WIRELESS]in[SETTINGS]of[NETWORK
SETTINGS]andthenperformdetailsettingsin[SETTING].
4. Click[APPLY]toconnecttothewirelessLAN.
NOTE:
• TousetheHTTPserverfunction,theprojectormustbeconnectedtoanetwork.First,connecttheprojectortoanetworkbythewiredLAN
andthenperformrequiredsettingsforthewirelessLANontheHTTPserver.
• Ifnetworkconictisoccurred,theSTATUSIndicatorstartstoblinkinorange.Inthiscase,changetheIPaddress.
IfyouwanttochangethewirelessLANsettingontheprojectoraftersettingitontheHTTPserver,performsetting
changeontheon-screenmenu.(→page78)