NEC PX602UL-BK - ❸ Turning on the Projector

14
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
NOTE:
• Theprojectorhastwopowerswitches:AmainpowerswitchandaPOWERbutton(POWERONandOFFontheremotecontrol)
•Turningontheprojector:
1. Press the main power switch to the ON position (I).
 Theprojectorwillgointostandbymode.
2. Press the POWER button .
 Theprojectorwillbecomereadytouse.
•Turningofftheprojector:
1. Press the POWER button.
 Theconrmationmessagewillbedisplayed.
2. Press the POWER button again.
 Theprojectorwillgointostandbymode.
3. Press the main power switch to the OFF position (O).
 Theprojectorwillbeturnedoff.
1. Press the main power switch to the ON position ( I ).
 ThePOWERindicatorlightsupred.*
* ThisindicatesthattheSTANDBYmodeisin[NORMAL]
setting.
(→
page114,168)
WARNING
The projector produces a strong light.When turning on
thepower,makesure no one within projection rangeis
lookingatthelens.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
 ThePOWER indicator goes from a steady red light to
aashingbluelight,andthepicture isprojectedonthe
screen.
TIP:
• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
PASSWORD.” is displayed, it means that the [SECURITY]
featureisturnedon.(→ page 35)
• Whenthe ECO message is displayed, it means that [ON] is
selectedfor[ECOMESSAGE].(→ page 95)
 Afteryouturnonyourprojector,ensurethatthecomputer
orvideosourceisturnedon.
NOTE:Thelogoscreen([LOGO]background)isdisplayedwhenno
signalisbeinginput(byfactorydefaultmenusettings).
Standby Blinking Power On
Steady red light Blinking blue
light
Steady blue
light
(→page168)