NEC PX602UL-BK - ❼ Turning off the Projector

24
2. Projecting an Image (Basic Operation)
❼ Turning off the Projector
To turn off the projector:
1. First, press the (POWER) button on the projector
cabinet or the POWER OFF button on the remote con-
trol.
 The[POWEROFF/AREYOUSURE?/CARBONSAV-
INGS-SESSION0.000[g-CO2]]messagewillappear.
2. Secondly, press the ENTER button or press the
(POWER) or the POWER OFF button again.
 Whentheprojector isin STANDBYMODE,the POWER
indicator lights up red. (When [STANDBY MODE] is in
[NORMAL]setting)
3. Make sure the projector is in STANDBY MODE, then
turnoffthemainpowerswitch(○ OFF)
 ThePOWERindicatorwillgooffandthemainpowerwill
turnoff.
• While the POWER indicator is blinking bluein short
cycles,thepowercannotbeturnedoff.
Power On
Steady blue light
Standby
Steady red light
Press twice
CAUTION:
PartsoftheprojectormaytemporarilyoverheatiftheprojectoristurnedoffwiththemainpowerswitchortheAC
powersupplyisdisconnectedwhiletheprojectorisinoperationorthecoolingfanisrunning.Handlewithcare.