NEC PX602WL - 053-2. Lens Control 2 ]

44
3.22 [ 053-2. LENS CONTROL 2 ]
Adjusts the lens position.
Command
02h 1Dh 00h 00h 04h <DATA01> - <DATA04> <CKS>
Data part
Item Description
DATA01 Target
00h Zoom
01h Focus
02h Lens Shift (H)
03h Lens Shift (V)
FFh Stop
DATA02 Adjustment mode
00h Specify an absolute value
02h Specify a relative value
DATA03 Adjustment value (low-order 8 bits)
DATA04 Adjustment value (high-order 8 bits)
Information
If specifying “Stop” in DATA01, the Adjustment mode and Adjustment value are not referenced.