NEC PX750U - Page 54

99
5. Using On-Screen Menu
Entering the currently projected signal into the Entry List [STORE]
1. Pressthe or buttontoselectanynumber.
2. Pressthe or buttontoselect[STORE]andpresstheENTERbutton.
Calling up a signal from the Entry List [LOAD]
PresstheorbuttontoselectasignalandpresstheENTERbutton.
Editing a signal from the Entry List [EDIT]
1. Pressthe or buttontoselectasignalyouwishtoedit.
2. Pressthe, , , or buttontoselect[EDIT]andpresstheENTERbutton.
The Edit window will be displayed.
SOURCENAME Enterasignalname.Upto18alphanumericcharacterscanbeused.
INPUTTERMINAL Selecttheinputsource.
LOCK Setsothattheselectedsignalcannotbedeletedwhen[ALLDELETE]isexecuted.The
changesmadeafterLOCKexecutioncannotbesaved.
SKIP Setsothattheselectedsignalwillbeskippedduringautosearch.
3. Settheaboveitemsandselect[OK]andpresstheENTERbutton.
NOTE: The input terminal cannot be changed to the currently projected signal.