NEC PX750U - Page 55

100
5. Using On-Screen Menu
Cutting a signal from the Entry List [CUT]
1. Pressthe or buttontoselectasignalyouwishtodelete.
2. Pressthe, , , or buttontoselect[CUT]andpresstheENTERbutton.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom
of the Entry List.
NOTE:
• Thecurrentlyprojectedsignalcannotbedeleted.
• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.
TIP:
• DataontheclipboardcanbepassedontotheEntryList.
• DataontheclipboardwillnotbelostaftertheEntryListisclosed.
CopyingandpastingasignalfromtheEntryList[COPY]/[PASTE]
1. Pressthe or buttontoselectasignalyouwishtocopy.
2. Pressthe, , , or buttontoselect[COPY]andpresstheENTERbutton.
The copied signal will be displayed on the clipboard at the bottom of the Entry List.
3. Pressthe or buttontomovetothelist.
4. Pressthe or buttontoselectasignal.
5. Pressthe, , , or buttontoselect[PASTE]andpresstheENTERbutton.
Data on the clipboard will be pasted to the signal.
Deleting all the signals from the Entry List [ALL DELETE]
1. Pressthe, , , or buttontoselect[ALLDELETE]andpresstheENTERbutton.
The confirmation message will be displayed.
2. Pressthe or buttontoselect[YES]andpresstheENTERbutton.
NOTE: The locked signal cannot be deleted.