Issue 1.0
SV9100 Dialer Setup Guide (Multiline Telephone) 2-7
Table 2-1 Account Provisioning Parameters in the UT880 Dialer Phone App
Field Name Description Default Value/Note
Account Name Name of the profile or account. This
cannot be left blank.
This is a required field.
User Name SIP user name assigned by the
administrator after provisioning in the
phone system that is used for HTTP digest
or equivalent authentication.
Display Name Name that is displayed in the application.
Password This field must match with the information
provisioned in the phone system.
Server Universal resource identifier (URI) or IP
address of the phone system and
corresponding domain.
This is a required field.
Enable Proxy A selection switch if there is a proxy server
serving the SIP agent like the Multiline
Telephone application.
This is a required field.
Proxy Phone system URI and port number for
SIP connectivity.
This is a required field.
UC Suite Server UC Server URI or IP address.
UC Suite Username UC application user name. Configured in Program
20-59-01
UC Suite Password UC application password. Configured in Program
20-59-02
To Next Page
Loading...
Need help?
General
