Issue 1.0
SV9100 Dialer Setup Guide (Multiline Telephone) 2-11
2.3 Contacts
The device contact allows the end user to use the native OS contacts application
from within the UT880 NMLT Multiline Telephone application. Clicking the
Contacts button opens the contact application within the App as shown. Refer to
Figure 2-7 Opening Contacts from the UT880 NMLT Multiline Telephone
Application.
The “Edit” button is used to edit the contact individually. Similarly, new contacts
can be added by clicking the “Add new” contact icon highlighted by the oval in
Figure 2-7 Opening Contacts from the UT880 NMLT Multiline Telephone
Application.
When the App starts, the contacts are imported into the App and contacts can be
either manipulated by invoking contact application independently from the OS, or
from within the App. The contact operation is described in detail in the
corresponding OS release.
Figure 2-7 Opening Contacts from the UT880 NMLT Multiline Telephone Application
Edit button
New Contact icon
To Next Page
Loading...
