NEC SV9100 Setup Guide

Issue 1.0
2-8 UT880 NMLT Multiline Telephone Application
If you have more than one account profile provisioned, then only one profile or
account can be active at any given time. To change the active profile press and hold
the account. A menu will appear as shown in Figure 2-3 Account Management - Set
as Default and Delete, which shows Set as Default option. Selecting this sets the
account selected to be the default, and activates it while deactivating the other
accounts/profiles.
Similarly, selection of Delete option will delete the account. It is recommended that
advanced setting not be changed without help from a qualified support person.
Figure 2-3 Account Management - Set as Default and Delete

NEC SV9100 Specifications

General

Unified Messaging	Yes
VoIP Support	Yes
SIP Support	Yes
VoIP Protocols	SIP, H.323
Mobility	Yes
Type	IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% (non-condensing)
System Type	Hybrid (Supports Analog, Digital, and IP)