NEC UNIVERGE DT310 - Page 17

10
1.
Example: Page Turning by Scroll Key
The following shows LCD indication of Program-
mable keys.
Appropriate icons are displayed according to the
feature. These displays cannot be changed by
user.
The following shows each LCD indication when
One-Touch Speed Dial key is set to Programmable
key.
When Station line/Trunk line are assigned.
No icons are displayed.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, see TO REG-
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
When any features using feature access code
are assigned.
Icons turn black.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, see TO REG-
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
Note:
For example, when an incoming call is terminated
to a line key on Page 3 while Page 1 is being dis-
played on the screen, the screen is not automati-
cally switched from Page 1 to Page 3. The user
must display Page 3 manually and then answer the
incoming call.
Scroll
Scroll
1
2
3
4
Ben
Rachel
Julia
Paul
012345
Hannah
FDA
FDN
Key No. 1
Key No. 2
Key No. 3
Key No. 4
Key No. 5
Key No. 6
Key No. 6
Key No. 8
1
2
3
4
Michael
Peter
Julia
James
Powell
Switch Page
Key No. 17
Key No. 18
Key No. 19
Key No. 20
Key No. 21
Key No. 22
Key No. 23
Key No. 24
Press Feature Key 2 on Page 3
to answer incoming call.
Page 1
Page 3
Flashing
Call on Hold
Press twice.
OR
OR