49
DIAL INTERCOM
To Initiate
Lift handset or press the key.
Press DICM key.
Dial desired intercom station number. Receive ring-
back tone.
To Answer
DICM LED flashes, indicating an incoming intercom
call.
Press DICM.
Lift handset or press key. LCD shows solid
green.
If called station is engaged in a non-intercom call,
the station may press DICM after placing the origi-
nal call on hold (with key.)
To Bridge Into A Dial Intercom Call
Press the DICM key, lift handset or press
key.
A three-party conference is established.
DT330/310
Speaker
Called party
4:26 PM TUE 13 APR 2004
ICM 2
Speaker
HOLD
Calling party
4:26 PM TUE 13 APR 2004
ICM 2
Note:
Bridging is an optional feature.
Note:
Dial intercom provides a Dial Intercom group
where each member of the group may be called
by a 1- or 2-digit number without using their
prime lines.
Speaker
Overriding party
4:26 PM TUE 13 APR 2004
OVERRIDE 3
4:26 PM TUE 13 APR 2004
CONF
To Next Page
Loading...
