NEC UNIVERGE DT310 - Boss Secretary Override

65
With caller on the line
While engaged in conversation on boss’ multiline,
press MW-CANCEL key. No service set tone is
heard.
BOSS SECRETARY OVERRIDE
Example:
Station 2000 is boss, Station 2001 is secretary.
Boss is connected to Trunk A.
Incoming call on Trunk B connects to secretary, but is
intended for boss.
To Program Boss/Secretary Override Key
Press key.
Press a One-Touch Speed Calling key.
Dial “Boss/Secretary Override” access code.
Press key. – displays on LCD.
Dial boss’ station number.
Press key again.
Secretary
Lift handset to answer Trunk B, ask caller to hold.
Press CALL HOLD feature key or key and
dial call hold access code. Receive Dial Tone.
Press BOSS/SEC OVERRIDE. Receive Ringback
Tone.
Boss
Hear 3 bursts of tone. LCD indicates:
Option 1
Boss presses key and converses with sec-
retary. Trunk A is placed on hold.
Secretary hangs up. Boss is connected to Trunk B.
Boss can alternate between the two parties by
pressing key.
4:26 PM TUE 13 APR 2004
MW CANCEL
4:26 PM TUE 13 APR 2004
MW CANCEL
DT330/310
Feature
Recall
Feature
Transfer
Boss‚
Ä
ô stati
number
4:26 PM TUE 13 APR 2004
C WAIT 2000
Secretary’s stati
number
4:26 PM TUE 13 APR 2004
C WAIT 2001
Answer
Answer