50
CONFERENCE
With call in progress, ask party to hold.
Press key, receive interrupted dial tone.
Dial desired number.
After call is answered, press key. The LED
lights.
Three-way conference is established.
Using Soft Key
With a call in progress, press key and dial
desired number.
After call is answered, press CONF Soft Key.
Three-way conference is established.
If one party hang up, other two remain connected.
Conf LED goes out.
TO ESTABLISH A BROKER CALL
While engaged in a call and wishing to consult a
third party, press key. Caller is automati-
cally placed on hold.
Dial desired party to consult.
Press key to return to original caller. Third
party is automatically placed on hold.
By repeating these steps, it is possible to alternate
between calls.
TO ANSWER A CAMPED-ON CALL
While engaged in a call, receive the camp-on indi-
cation (one short tone burst). LED of key
flashes.
Press key. Call in progress is placed on
hold.
Connection to camped-on call is established.
Press key to return to original call.
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate
between calls. Display indicates connected station
or trunk at any given time.
DT330/310
Transfer
Conf
4:26 PM TUE 13 APR 2004
CONF
Transfer
4:26 PM TUE 13 APR 2004
CONF
MIC >>>
DT330/310
Transfer
Note:
The display indicates connected station or trunk
at any given time.
Transfer
DT330/310
Answer
Answer
Answer
type
Trunk
number
Trunk
4:26 PM TUE 13 APR 2004
CAMP ON DDD 3
To Next Page
Loading...
