NEC UNIVERGE ITK-12D-1 - Page 26

TERMINAL SETUP
26
TO SELECT RINGER TONE
The terminal have 10 kinds of ringer tones that you can select.
1. Press the Feature key and [3] key. The LCD
displays the selected tone number (n=1 ~ 13).
No.
Frequency（Hz）
Modulation（Hz）
1
520/660
16
2
520/660
8
3
1100/1400
16
4
660/760
16
5
Melody1
6
Melody2
7
Melody3
8
Melody4
9
Melody5
10
Melody6
11
C-Major Scale Ring tone
12
Kanon
13
Turkish March
The tone number 5, 6, and 8~13 sound continuously.
TO ADJUST
TRANSMISSION/RECEIVING
VOLUME
The handset volume can be changed.
1. Press the Feature key and [4] key. The LCD
displays the current volume.
2. Press the Feature key and [4] key again to
alternate between Large and Small volume.
TO ACTIVATE HANDS-FREE
To Set Hands-free on:
1. Press the Feature key and [5] key.
The LCD displays “HANDS FREE ON”.
To Set Hands-free off:
1. Press Feature key and [6] key.
The LCD displays “HANDS FREE OFF”.
CALL INDICATOR LAMP ON/OFF
You can choose to turn the call indicator lamp either on or off while
the terminal is ringing.
1. Press the Feature key and [7] key.
The call indicator lamp lights when used as a Message
Waiting Lamp, even when it is turned off by the above
operation.