TERMINAL SETUP
27
SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial Pad or
Preset Dial to originate a call.
When Only Dynamic Dial Pad Is Activated:
To Set/Reset Dynamic Dial Pad
1.
Press the Feature key and [8] key. The LCD
displays “Direct Dial Pad ON” or “Direct Dial Pad
OFF”.
When this feature is ON, you may initiate a call by
immediately dialing the number and the station will go hands-
free off-hook automatically. For details, see TO ORIGINATE
A CALL USING SELECTIVE DIALING (DYNAMIC DIAL
PAD, PRESET DIAL).
When Only Preset Dial Is Activated:
To Set/Reset Preset Dial
1.
Press the Feature key and [8] key. The LCD
displays “Preset Dial Pad ON” or “Preset Dial Pad
OFF”.
When this feature is ON, you may initiate a call by
pressing Speaker Key or going off-hook after dialing the
number. For details, see TO ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC DIAL PAD, PRESET
DIAL).
When Both Dynamic Dial Pad and Preset
Dial Are Activated:
To Set Dial Mode
1.
Every time the Feature key and [8] key are
pressed, Dial Mode switches.
To Next Page
Loading...
