NEC UNIVERGE ITK-12D-1

TERMINAL SETUP
28
SETUP WITH MENU KEY FOR
DT920 SERIES
TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable Off-hook
ringing
1. Press Menu key while terminal is in an idle state.
2. Select
□
1 User Settings.
3. Select
□
1 Incoming Call.
4. Select
□
1 Offhook Ring.
5. To disable/enable the off-hook ringing, select
□
1 Disable or
□
2 Enable.
■Default setting is
□
2 Enable.
■The enabled item is highlighted.
TO SET RINGING OF HEADSET
The procedure below shows how to enable/disable the ringing of
headset.
1. Press Menu key while terminal is in an idle state.
2. Select
□
1 User Settings.
3. Select
□
1 Incoming Call.
4. Select
□
2 Handset Ring.
5. To disable/enable the ringing of headset, select
□
1 Disable or
□
2 Enable.
■Default setting is
□
1 Disable.
■The enabled item is highlighted.