TERMINAL SETUP
29
TO SET RINGER TONE
The procedure below shows how to change the ringer tone for
internal call and external call.
1.
Press Menu key while terminal is in an idle state.
2.
Select
□
1 User Settings.
3.
Select
□
1 Incoming Call.
4.
Select
□
3 Ring Tone.
5.
Select
□
1 External Call when setting the ringer
tone for external calls. Select
□
2 Internal Call
when setting the ringer tone for internal calls.
6.
Select a desired tone type. You can preview the
designated ringer tone.
For example, press [1] + [5] to select
□
15 Music Ring 1.
The enabled item is highlighted.
■When selecting Automatic or not performing this ringer
tone setting, Tone Type 1 is automatically applied.
■When selecting Automatic, the preview function will not
operate.
■Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone sounds
continuously. Actual ringer pattern of each tone is
determined by the initial system settings.
■Terminal settings may not become effective, according as
the system settings. For details, contact the system
administrator.
To Next Page
Loading...
