NEC UX5000 Quick Setup Guide

inDepth Basic Setup Guide
Section 2: Programming inDepth
inDepth Quick Setup Guide for the UX5000 ◆ 7
Section 2: Programming inDepth
Section 2: Programming inDepth
There are three components within inDepth that will need configuring:
1. The system configuration which is done via the Configurator
2. The screen layouts
3. The report templates
This Quick Start guide will deal with system configuration, the other two sections are not covered here as
they will be personal to each site and will evolve over time.
System Configuration
The Configurator can be accessed from the Configurator icon on the tool bar (wrench icon) of either the Real
Time client or the Reporter client or from by double-clicking MISCFG.EXE in C:\inDepthUX5000\US on
the server.
The Configurator
When the Configurator loads, you will be presented with a series of “Tabs” representing the following
devices:
1. Lines and DIDs
2. Extensions and Agents
3. Account Codes
4. Miscellaneous

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English