NEC VT700 - Specifications

56
7. Appendix
 Specifications
This section provides technical information about the VT700 projector's performance.
Model Number VT700
Optical
LCD Panel 0.63" p-Si TFT active-matrix with Micro Lens Array
Resolution 1024  768 pixels* native, up to UXGA with Advanced AccuBlend
Lens Manual zoom and manual focus
F1.7 - 2.0 f=18.9 - 22.7 mm
Lamp 210 W AC lamp (172W Eco mode)
Light Output** 3000 lumens (approx. 80% in Eco mode)
Contrast Ratio 500: 1 (full white: full black)
Image Size (Diagonal) 21 - 300 inches / 0.5 - 7.6 m
Projection Distance 28 - 424 inches / 0.7 - 10.7 m
Projection Angle Tele: 8.3° - 8.6°/ Wide: 9.9° - 10.3°
Keystone Correction +/- 30° Vertical
Electrical
Inputs 1 RGB/Component (D-Sub 15 Pin), 1 RGB (Digital/Analog) (DVI-I 29 Pin, HDCP***
supported), 1 S-Video (DIN 4 Pin), 1 Video (RCA), 1 (L/R) RCA Audio, 1 Stereo
Mini Audio, 1 PC Control (DIN 8 Pin)
Outputs 1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio
Video Compatibility NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM,
DTV: 480i, 480p, 720p, 1080i (60Hz)
576i, 576p, 1080i (50Hz)
DVD: Progressive (50/60Hz)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz
Video Bandwidth RGB: 80 MHz (-3dB)
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H)768 dots (V),
External Control RS232, IR
Sync Compatibility Separate Sync / Composite Sync / Sync on Green / Sync on Video
Built-in Speaker 5W (monaural)
Power Requirement VT700: 100 - 240V AC, 50 / 60 Hz
VT700G: 200 - 240V AC, 50 / 60 Hz
Input Current VT700: 3.3 - 1.5 A
VT700G: 1.7 A
Power Consumption 8W in Standby mode /
295W in Lamp Normal mode / 240W in Lamp Eco mode