NEC Xen Topaz - Setting Camp On; Callback; Trunk Queuing

If your call doesn’t go through…
Set Camp On / Callback
(Hear Busy Tone
or No Answer)
(
851+35
)
[
Lit Red when set
]
Wait for the
system to call
you back
Wait without
hanging up
58
Cam
p
On Ke
y
<Cam
p
On>
<Callback>
0
 <Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer.
In case of Outside Call, when you hear Dial Tone, begin telephone number dialling.
 <Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for the
called party to answer.
In case of Outside Call, when your phone starts the ringing, lift handset, hear Dial Tone,
and begin telephone number dialling.
 This function is applicable in case all trunks are busy condition. (not applicable for dialled outside party
bus
y)
When Cam
p
On set.
–
OR
–
sim
p
l
y
p
ress the Cam
p
On ke
y
8 07
Set / Answer a Message Waiting
(Hear Busy Tone
or No Answer)
Your phone’s
Indicator is
flashing in Red
Set
Answe
r
8 14
MW Ke
y
(
851+38
)
8 14
MW Ke
y
(
851+38
)
 When you set a MW, the called party’s Indicator starts to flash, and your Indicator is lit in Red.
 When you answer a MW, the Indicator shall automatically be off when the called party answers.
Cancel Camp On / Callback
6