XN120 Battery Box
XN120 Battery Box Guide 3
What is the External Battery Box?
· The battery box is an optional unit that
connects to the XN120 main unit or
expansion unit.
· One battery box is required for each of
the XN120 main/expansion units.
· The battery box provides battery
backup when the power fails to the
XN120 system.
· Each battery box will require two Valve
Regulated Lead Acid batteries (Yuasa
2.6Ah 12V)
Battery Specification
Battery capacity 12V, 2.6Ah or equivalent (Voltage must be 12V)
Battery
Only the manufacturer and type
of battery specified must be
used.
Yuasa NP2.6-12 (134x67x64 mm / 1.12kg)
Number of Batteries (per a Box) 2
Backup Duration (Estimated) 1 Hour
Charging time 12 hours (from fully discharged)
Installation Procedure
1
Unpack the battery box
2
Floor/shelf mount the battery
box
The battery box should also be secured to a wall.
3
Install the batteries
4
Power off the XN120
5
Connect the battery box to the
XN120 unit
6
Power on the XN120
7
Test the power fail operation
To Next Page
Loading...
