NEC XN120 - Page 16

Configure SIP Trunks
16 XN120 Voice Over IP Card Guide
(example: LondonXN120
or 01234654321)
Ø Press DC several times when you are done to return to the
Program Mode.
(Press SPK to save changes and exit if you are finished).
3
Program 84-13-28
Audio Capability Priority. This
is the CODEC that will be used
for SIP Trunk Calls.
0: G711
1: G723
2: G729
Default Setting:
G.711
Ø Enter the CODEC Type to use for SIP Trunk calls.
Ø Press DC several times when you are done to return to the
Program Mode.
(Press SPK to save changes and exit if you are finished).
Configuration Sheet : SIP Trunks
Program 10-28-01
Domain Name =
Program 10-28-02
Host Name =
Program 10-28-04
UserID =
Program 84-13-28
SIP Trunk CODEC =
84-13-28
Audio Priorit
y
0