NEC XN120 - Installation Procedure

Installation Procedure
XN120 Voice Over IP Card Guide 5
Installation Procedure
1
Unpack the VOIPU card(s)
2 Install Daughterboard
(if required)
3
Power off the XN120 system
4
Fit the EXIFU-A1
if not already installed
5 Fit the 2OPBOX
if not already installed
6
Install the VOIPU card(s) into
the 2OPBOX
7
Connect the VOIPU cards and
EXIFU-A to the data network
8
Power on the XN120
9
Configure the IP Addresses
10
Test the IP network
connectivity
11
Configure SIP Trunks
12
Configure the Incoming Calls
13
Configure the Outgoing Calls
14
Configure the Caller ID