10
Threading the upper thread
Please following the number order and see the corresponding illustrations below. It is
important to carry out the threading correctly to get a quality sewing. Otherwise several
problems will occur.
ONOFF
1. Turn the power switch to on ("I"). Raise
the presser foot lifter.
2. Press the needle up/down position button
to bring the needle and take-up lever to
highest position.
3. Place the thread and spool holder onto
the spool pin. For better sewing quality,
choose a proper size of the spool holder
for the thread and attach it next to to the
thread.
①
Large spool holder
②
Small spool holder
2
1
To Next Page
Loading...
