31
© by NECTA VENDING SOLUTIONS SpA 02-2004 184 02
CONFIGURING THE ELECTRONIC BOARDS
The electronic boards are designed to be used in many
machine models.
In the event of replacement, or when wishing to change the
machine performance, it will be necessary to check the
configuration of the boards and install the appropriate
software.
SOFTWARE UPDATE
The machine is fitted with Flash EPROMs which can be
electronically updated.
By means of a special program and suitable system
(Personal Computer, Up Keys or similar) the machine
management software can be updated without replacing
the EPROMs.
To Next Page
Loading...
