Nedap AP7803 User Manual

Installation and Configuration | AEOS Blue and vehicle identification EN
Manual version 3 22/48
3. Right-click the StandardDoor AEbc, and click Properties.
4. Open the Identifier type editor and select Generic.
5. Set the Format to
Binary.
6. Check the other settings, see the example below. Click
OK.
The identifier type settings must match the settings in AEOS, see section 3.5.
7. Press CTRL+E and click Yes to deploy the configuration.

Nedap AP7803 Specifications

General

Brand	Nedap
Model	AP7803
Category	Controller
Language	English