Nedap AP7803 - User Manual

EN
Installation and Configuration
AEOS Blue and
vehicle identification
TRANSIT, uPASS, ANPR
Version
3
06-08-2019

Nedap AP7803 Specifications

General

Brand	Nedap
Model	AP7803
Category	Controller
Language	English

Summary

TRANSIT Ultimate (for Wiegand)

Configure TRANSIT Reader (for Wiegand)

Detailed steps for configuring the TRANSIT reader, covering firmware update, communication testing, and dip switch settings.

Configuring AEmon (for Wiegand)

Configuring AEOS (for Wiegand)

uPASS

Configure uPASS Reader (for Wiegand)

Configuration steps for uPASS readers using Wiegand format, including retrieving card info and setting the reader to UHF mode.

Configure uPASS Reader (for Nedap XS)

Configuration steps for uPASS readers using Nedap XS format, including retrieving card info and setting the reader to TRANSIT mode.

Configuring AEmon (for uPASS)

Configuring AEOS (for uPASS)

Issue an Identifier

ANPR Access for TCP;IP

Configure ANPR Access Reader for TCP;IP

Steps to configure the ANPR Access reader's web interface to send license plate data via TCP.

Configuring AEmon (for ANPR Access)

Configuring AEOS (for ANPR Access)

Configuring AEmon for TCP;IP (with IpBadge)

Configuring AEmon for TCP;IP (with Generic Message Mapper)

Configuring AEOS (for ANPR LUMO TCP;IP)

Configuring AEmon (for ANPR LUMO Serial)

Configure Identifier Type in AEmon

Configuring AEOS (for ANPR LUMO Serial)

Define Identifier Type in AEOS

Issue Licence Plate as Identifier