EasyManua.ls Logo

Nedap AEOS Blue - User Manual

Nedap AEOS Blue
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
Installation and Configuration
AEOS Blue and
vehicle identification
TRANSIT, uPASS, ANPR
Version
3
06-08-2019
Question and Answer IconNeed help?

Do you have a question about the Nedap AEOS Blue and is the answer not in the manual?

Nedap AEOS Blue Specifications

General IconGeneral
ModelAEOS Blue
CategoryController
ConnectivityEthernet
MountingDIN Rail
Inputs8 supervised inputs
Tamper DetectionYes
Humidity10% to 90% non-condensing
Power Supply12-24 VDC
CommunicationTCP/IP, RS485
CompatibilityAEOS system
Operating Temperature-20°C to +60°C
Outputs4
CertificationsCE, FCC

Summary

Introduction to AEOS Blue and Vehicle Identification

TRANSIT Ultimate (for Wiegand) Configuration

TRANSIT Ultimate Connection Overview

Details the physical connection overview for the TRANSIT Ultimate reader.

Configuring the TRANSIT Reader for Wiegand

Steps to configure the TRANSIT reader for Wiegand interface, including firmware update.

Configuring AEmon for TRANSIT (Wiegand)

Guides on configuring AEmon for the TRANSIT reader using the Wiegand interface.

Configuring AEOS for TRANSIT (Wiegand)

Instructions for defining identifier types and checking AEOS event log for TRANSIT reader.

UPASS Reader Configuration

UPASS Connection Overviews

Details connection overviews for UPASS Access, Reach, and Target readers.

Configuring UPASS Reader for Wiegand

Configuration steps for uPASS reader using Wiegand format, including UHF mode.

Configuring UPASS Reader for Nedap XS

Configuration steps for uPASS reader using Nedap XS format, including TRANSIT mode.

Configuring AEmon for UPASS

Steps to configure AEmon for the uPASS reader, focusing on identifier types.

Configuring AEOS for UPASS

Guides on defining identifier types and issuing identifiers in AEOS for uPASS.

ANPR Access for TCP;IP

ANPR Access TCP;IP Connection Overview

Illustrates the physical connection setup for ANPR Access reader via TCP/IP.

Configuring ANPR Access Reader for TCP;IP

Steps to configure ANPR Access reader to send license plate data via TCP messages.

Configuring AEmon for ANPR Access

Guides on configuring AEmon for ANPR Access reader, including identifier type setup.

Configuring AEOS for ANPR Access

Instructions for defining identifier types and issuing license plates in AEOS for ANPR Access.

ANPR LUMO for TCP;IP Configuration

Configuring ANPR LUMO Reader for TCP;IP

Steps to configure ANPR LUMO reader for TCP/IP communication.

Configuring AEmon for ANPR LUMO (TCP;IP with IpBadge)

Configuring AEmon using IpBadge for ANPR LUMO reader via TCP/IP.

Configuring AEmon for ANPR LUMO (TCP;IP with Generic Message Mapper)

Configuring AEmon using Generic Message Mapper for ANPR LUMO reader via TCP/IP.

Configuring AEOS for ANPR LUMO

Instructions for defining identifier types and issuing license plates in AEOS for ANPR LUMO.

ANPR LUMO via Serial Configuration

Configuring ANPR LUMO Reader for Serial

Steps to configure ANPR LUMO reader for serial communication.

Configuring AEmon for ANPR LUMO (Serial)

Guides for configuring AEmon using Generic Message Mapper for ANPR LUMO via serial.

Configuring AEOS for ANPR LUMO (Serial)

Instructions for defining identifier types and issuing license plates in AEOS for ANPR LUMO via serial.

Related product manuals